used pellet stoves for sale are available as freestanding units or fireplace inserts that give your home the appearance of an old-fashioned fireplace with wood burning. They are available as freestanding models as well as fireplace inserts. They can provide the appearance of an old-fashioned wood-burning fire.
The auger carries pellets from the hopper into the combustion chamber, where they are burned to create heat. Sensors monitor the fire and can adjust the rate of operation to maintain your desired temperature in the room.
1. Energy Efficiency
Pellet stoves are renewable, non-toxic fuel made of compressed sawdust and other materials. These are usually removed from landfills, but can be used to create a clean, efficient source of heat. They can help homeowners cut down on their energy consumption, and consequently greenhouse gas emissions. Many users of pellet stoves say that they have recouped their initial investment in only a couple of years, through a reduction in their heating bills.
Pellets are much more dense and compressed than natural wood, which makes them more efficient for burning. They also produce much less creosote than traditional fireplaces that burn wood. Additionally, they are packaged in plastic bags to seal out moisture and need less frequent cleaning.
Pellet stoves, like other heating systems need to be sized and vented properly. A professional technician can determine the venting needs and space requirements to ensure the best results.
When the hearth is installed, it is constructed to fit the space and the vent is installed through a pre-cut hole your home's siding. The vent can then be installed on either a side wall or the roof, depending on your preference and the local regulations.
When the vent and hearth are completed, the pellet stove can be connected and turned on. Certain manufacturers offer the option of a remote control to make it easy to start and keep the fire burning, whereas other manufacturers offer additional sensors that monitor airflow and combustion as well as flue temperatures and pressure. When the system detects it requires more pellets or less, it will signal to the auger that it should accelerate or slow it down according to the need.
Every stove has a storage hopper that holds from 35 to 130 pounds of pellets until required. Hopper capacities determine the frequency at which the stove will need to be filled, with larger hoppers allowing longer intervals between refills. A grille draws fresh air out of the room and then passes it over an exchanger that then blows heated air into the living area through convection. A auger, grate or any other device distributes pellets and a pan beneath collects any unburned ones and also any combustion leftovers.
While pellet stoves are more efficient than wood-burning stoves, they're not as efficient as natural gas furnaces or electric heaters. The electric components that drive their motorized components require electricity which could cause problematic during an power outage, even though backup systems are readily available for batteries and generators.
2. Low Maintenance
Pellet stoves are extremely efficient, but they require some attention to function properly. Cleaning your stove and its exhaust vent on a regular basis will prevent the buildup of harmful creosote. This could cause a fire or explosion that can damage the stove and/or your home.
pellet stoves for sale used compressed natural wood particles or other materials (like corn kernels, nutshells or small pieces of scrap wood). The pellets are fed into the combustion chamber by an auger powered with electricity. The thermostat you choose controls the speed at which pellets are delivered to the burner. This lets the fire remain roaring, or to lower the rate or even shut down according to the temperature you set. The ash will be disposed in an empty ash tray underneath the burner. It can be easily removed and then disposed.
Pellets are made from waste products that would have been discarded when processing lumber. They are a renewable source and produce less particulates than traditional wood-burning stoves, making them a cleaner heating source. The amount of carbon monoxide, carcinogens and other harmful chemicals that are released from pellet stoves are also significantly lower than the more modern EPA certified wood stoves.
These stoves aren't required to be vented via a chimney, like is the case with traditional wood stoves. Instead, they should be vented through a wall or other structure outside. Pellet stoves have flue ports that are open from the rear or the top of the appliance. They are connected to a vent pipe that extends outside the home.
A pellet stove has one disadvantage it requires you to purchase or store enough fuel pellets to last the whole winter season. On average, homeowners of a pellet stove consume three tons of pellets throughout the course of winter, at a cost of $200 for each ton. The costs can add up, but they are less expensive than buying firewood and transporting it to a wood-burning stove or fireplace. You should purchase enough pellets to ensure that your stove can run through the coldest winter months. Also, you'll need to have a place to store the pellets (preferably cool and dry).
3. Reduced Carbon Footprint
Pellet stoves use renewable biomass fuels to generate heat, reducing dependence on fossil fuels that are depleted. This helps reduce the carbon footprint as well as helping diversify the energy sources used in homes.
Even the latest wood stoves that are EPA certified emit significantly less carbon dioxide than pellet stoves. The emissions from pellet stoves are significantly lower than the ones from gas furnaces. Pellets can be made of sawdust and bark as well as other lumber remnants. They may also contain soybeans, corn, or agricultural waste. When they are burned, they release less particles, which can cause respiratory problems and allergic reactions and carcinogens as well as nitrous dioxide.
The main difference between wood stoves and pellet stove is the feed system. Pellet stoves come with hoppers to store the pellets. When the thermostat or sensors suggest that the room is in need of heating, the auger turns and the pellets are fed into the combustion chamber, where they burn and generate heat. The air that is released from the combustion chamber moves through a heat exchanger that transfers the heat to a blower and out into the room. This process produces very little emissions, and creosote is not formed.
After the hopper is empty, a cyclone process removes the ash and deposits it in an ash pan. The stove also has a fan to circulate the clean, heated air into the living room. Most pellet stoves require only minimal maintenance and feature a large viewing area for you and your family to relax and enjoy the flames.
The quality of pellets is the main element that influences the emissions from pellet stoves. The poor quality pellets emit more emissions. When choosing your pellets, ensure that they are certified to meet certain standards and do not contain other ingredients, such as petroleum products or urea. Look for a company with a warranty and will replace or repair parts in the event of an issue. Some states offer homeowners tax credits in the event that they decide to go greener. This is a great opportunity to to offset the initial cost of this kind of stove and make it more affordable to set up.
4. Reduced Noise
Pellet stoves produce a minimal amount of smoke or exhaust compared to fireplaces that burn wood. They also use an electric fan to distribute the heat more evenly across the space. This is a major reason pellet stoves need less maintenance than wood stoves. While wood stoves require frequent cleaning of chemicals and particulates to prevent deterioration, pellet stoves can be cleaned with the use of a vacuum cleaner made of metal.
Many manufacturers have designed their stoves so that they are simple to install and operate, as well as maintain. The stoves are available in different styles to match the decor of your home. Certain models come with a WIFI app, remote control, and programmable thermostat.
The majority of pellet stoves come with a large fuel hopper which can hold 35 to 130 pounds of pellets. The pellets are then pumped into the combustion chamber using an auger. The speed at which the pellets are delivered to the burner determines how hot the fire is and the heat output. The hopper may be filled with hardwood pellets composed of dense wood species like hickory and oak or softwood pellets. used pellet stoves for sale can also use alternative biomass pellets, such as those made of corn or switchgrass which are an environmentally friendly option.
Since pellet stoves burn as a clean fuel, they generate less smoke than traditional wood-burning fireplaces and require fewer maintenance. They do not need a chimney and are therefore a better option for retrofits or new construction.
As opposed to wood stoves that require regular maintenance to be free of creosote and other chemicals, pellet stoves need to be periodically inspected for proper operation and maintenance. This could include periodic cleaning and inspection of the ash or "clinker" as well as the motors and fans according to the model. Your appliance dealer can provide the proper procedure for your specific brand and model. He can also assist you to find the correct fuel for your stove and provide details on storage and safety.